Common questions about quotation, manufacturing capabilities and delivery.
You need to provide a process requirement table and detailed information on board making (drawing format: CAD, 99SE, Gerber can all be used)
Rogers, Taconic, Teflon/F4B, Arlon, Wangling.
Our surface treatment processes include: gold deposition, gold plating, tin deposition, hot air leveling (tin spraying), silver deposition, OSP, and nickel plating.
We can drill holes as small as 0.25 mil in diameter — this is the limit of our drilling capability.
The specific answer depends on your requirements, usually greater than 18um
We can make board within the range of 0.1-6.0mm.
Our minimum line width is 3 mil, the minimum line spacing is 3 mil, and the minimum hole size is 0.25 mil, which is the limit of our process capability.
During the manufacturing process, we have multiple quality inspections for overlap gauges: flying needle testing, functional system testing, laser detection system, testing frame testing, and other processes.
Sample production can be as fast as 24 hours. Batch production takes 8–10 days, depending on the drawings.
CAD, 99SE, Gerber.
Our company has over ten years of strong production experience, exquisite craftsmanship, engineering technology, and high-quality service. At the same time, it has advantages such as high quality, low cost, and foreign information technology support.
Our company is a manufacturer mainly engaged in high-frequency and high difficulty production.